25% Off XStore Office Chairs + 20% Off Classic Furnitures
- Alemite USA relief fitting 1/8″ NPT
- 1 to 5 PSI maximum relief pressure
- Suitable for grease and oil
- Alemite Relief Fittings are used on gearbox housings & bearings (kingpins, universal joints, etc.) where excessive lubrication pressure is unsuitable
- Flush type fitting with 1/8" NPT thread type
- Relief pressure minimum 1 PSI, maximum 5 PSI
- Pressure based on using Air/Grease/Oil air at 1.2 Ft3/Hr
- Exceeds 72-hour salt spray test
- Trivalent zinc plating
- RoHS compliant
- Fittings open at predetermined pressure
- May be used with grease or oil
- Complete range of oil relief fittings & oil air vents available
2 Years
ALEMITE RELIEF FITTING 1/8R...